enduro husqvarna

enduro husqvarna in East Village

enduro husqvarna East Village

enduro husqvarna East Village.The manufacturer evidently has a fair bit of faith in the bike, offering a 24month warranty.
Here is the factory blurb on the toy.
Introduction the new husqvarna te 610 i.
Benefits from having many parts in common with other fourstroke, racing enduro husqvarna.
With the new te 610 i.
The husqvarna te 610 i.
Is perfect for those of you that want a bike with muscle but also class.
The te 610 i.
Combines a strong character with looks.
Part of its brilliance comes from the chassis that has been tuned to cope with daily road use but the machine is still powered by one of the best engines in production today, especially in the lowmedium rev band.
The new version has had some highly significant modifications to the cylinder and head as well as now being fitted with a new electronic injection system that conforms to euro 3 standards.
The 610 te i.
Now has an electronic injection system that was developed in collaboration with mikuni.
The te 610 i.
The handlebars and controls are very much along the same lines as the te racing version and the riding position can be changed by adjusting the clamps where the handlebars are connected to the forks.
At the front is a pair of marzocchi 45 mm inverted forks.
The brembo brakes feature a floating 4caliper 260 mm front disc while rear braking is left to a 220 mm disc.
The te 610 i.
Was also designed to allow for comfortably carrying a pillion passenger.
The saddle has different density padding and antislip foot pegs.
Thanks to special clips fitted to the rear chassis and mudguard, special side panniers and a main stand can be fitted as an optional extra.
The rear mudguard has a new separate number plate carrier with an independent illumination light.
Engine a balancing countershaft is fitted to the 610 engine to offset the vibration one would normally expect with a large single cylinder unit.
Lubrication is by means of two lobe type pumps.
One pump supplies oil to the head and crankshaft, while the second pump draws oil from the crankcase and supplies it to the gearbox.
Breathing is via a 4valve, single overhead cam and twin arm rocker system with variable valve springs.
A new timing chain tensioner has also been introduced to further dampen noise.
The 610 te i.
Now has an electronic injection system that was developed in collaboration with mikuni.
The kokusan 360w threephase ignition flywheel is also new.
The water temperature sensor is positioned on the head.
The injection ecu processes signals and governs the operation of the solenoidoperated valve fitted to the right hand side of the radiator.
The catalyser section on the silencer and the area around the passenger foot pegs have been covered with stainless steel protection.
Maximum output has been increased to 39 kw at 7000 rpm at the crankshaft.
The husqvarna te 610 ie, will line up alongside the te 250, te 450 and te 510 to complete the 2008 husqvarna enduro range.
All husqvarna road legal motorcycles have a factory endorsed 24month parts and labor warranty.
Thursday, 15 may 2008
Ï»¿ initiation the recently husqvarna tellurium 610 i.
With the modern tellurium 610 i.
The husqvarna tellurium 610 i.
The tellurium 610 i.
Ï»¿ with the modern tellurium 610 i.
The husqvarna tellurium 610 i.
The tellurium 610 i.
The 610 tellurium i.
Ï»¿ the husqvarna tellurium 610 i.
The tellurium 610 i.
The 610 tellurium i.
The tellurium 610 i.
Ï»¿ the tellurium 610 i.
The 610 tellurium i.
The tellurium 610 i.
The handlebars and controls are very much on the same lineages equally the te racing version and the riding position can be changed by adjusting the clamps where the handlebars are connected to the forks.
Ï»¿ the 610 tellurium i.
The tellurium 610 i.
The handlebars and controls are very much on the same lineages equally the te racing version and the riding position can be changed by adjusting the clamps where the handlebars are connected to the forks.
The tellurium 610 i.
Ï»¿ the tellurium 610 i.
The handlebars and controls are very much on the same lineages equally the te racing version and the riding position can be changed by adjusting the clamps where the handlebars are connected to the forks.
The tellurium 610 i.
Ï»¿ the handlebars and controls are very much on the same lineages equally the te racing version and the riding position can be changed by adjusting the clamps where the handlebars are connected to the forks.
The tellurium 610 i.
The 610 tellurium i.
The husqvarna tellurium 610 ie will trace up aboard the tellurium 250 tellurium 450 and tellurium 510 to complete the 2008 husqvarna enduro range.. enduro husqvarna

Husqvarna Enduro 2006 (4:05:27)
410,255 views
"Factory Racing 2006"